Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
+
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation

Product Introduction 
A prefabricated packaged substation (commonly referred to as a “box-type substation”) is a modular, pre‑assembled, turnkey electrical substation that integrates high‑voltage distribution, transformers, low‑voltage distribution, metering and protection, reactive power compensation, and a monitoring system. With an all‑in‑one integrated design and a fully enclosed structure, it undergoes wiring, commissioning, and testing at the factory, requiring only foundation installation and on‑site connection before it can be put into service. Widely used in urban grid upgrades, residential communities, commercial complexes, industrial parks, photovoltaic and wind‑power projects, charging‑station facilities, municipal roadways, and temporary substations for industrial and mining operations, it serves as a replacement for traditional civil‑engineering substations and has become the mainstream equipment for modern, intelligent power distribution. 
Core Advantages 
High integration and short construction period: The entire unit is factory‑prefabricated and undergoes standardized assembly and commissioning, eliminating the need for complex civil engineering work. At the site, only hoisting and wiring are required to energize the system, significantly shortening the project schedule and enabling rapid deployment and commissioning. 
Extremely compact footprint, flexible site selection: With a compact structure and small footprint—occupying only about one-fifth the space of a conventional civil‑engineered substation—it can be directly installed at load centers, making it well suited to a variety of constrained sites, including urban areas, industrial parks, open spaces, and roadside locations. 
Comprehensive security protection and stable operation: The fully enclosed, corrosion‑resistant enclosure provides protection against dust, rain, moisture, condensation, and small animals. It is equipped with comprehensive five‑protection interlocks and safeguards against overload, short circuit, leakage current, overvoltage, and undervoltage, effectively eliminating the risk of operator error and ensuring stable, round‑the‑clock operation. 
Cost reduction and efficiency gains, with excellent value for money: It eliminates substantial civil‑engineering, interior‑finishing, and labor costs, resulting in lower overall investment; by supplying power to loads located nearby, it effectively reduces line losses, leading to low long-term operation and maintenance costs and significant economic benefits. 
Wide range of application scenarios and diverse power supply modes: It supports a variety of power supply configurations, including ring‑network supply, dual‑source supply, terminal‑type supply, and high‑voltage metering, and is compatible with diverse high‑ and low‑voltage substation applications across residential, industrial, new‑energy, and municipal sectors. 
Intelligent and controllable, with convenient operations and maintenance: Optional features include intelligent monitoring, remote communication, data acquisition, and fault alarms, enabling real-time tracking of equipment operating status. The modular design ensures a clear layout, making inspection, troubleshooting, and maintenance simple and efficient. 
Aesthetic appearance, adaptable to various environments: The cabinet’s color scheme is customizable, with a well‑proportioned design that seamlessly integrates with residential landscapes, municipal greenery, and campus architecture—clean, aesthetically pleasing, and free of visual jarring.

Product Specifications

Overall parameters

Model number

YBW-12/0.4-1600

Rated capacity

1600kVA

Rated voltage on the high-voltage side

12KV

Low-voltage side rated voltage

0.4kV

Rated frequency

50Hz

Wiring Group

Dyn11

Voltage regulation method

No-load voltage regulation ±2×2.5%

Number of phases

Three-phase

Cabinet Body and Structure

Box Type

European-style packaged substation (pre-assembled)

Enclosure structure

High-voltage room + transformer room + low-voltage room, with the three rooms separately partitioned.

Housing material

Cold-rolled steel sheet / aluminum alloy / stainless steel (optional), with an electrostatic powder-coated finish.

Protection rating

Enclosure IP33 (standard) / IP54 (outdoor enhanced)

Assistance and Monitoring

Temperature control system

Transformer temperature controller, over-temperature alarm, over-temperature trip

Ventilation and heat dissipation

Top-mounted exhaust fan in the transformer room, with automatic temperature‑controlled start/stop.

Lighting

Each room is equipped with its own maintenance lighting, operated by a door-mounted switch.

Anti-condensation

Heater + Temperature and Humidity Controller (optional)

Communication interface

RS485/Modbus-RTU, supports remote monitoring.

Five-Prevention Interlocking

The high-voltage side is equipped with a comprehensive mechanical five-protection interlock.

Environmental conditions

Ambient temperature

-25℃ to 40℃

Relative humidity

≤95% (no condensation)

Altitude

≤1000 m (derating required for distances over 1000 m)

Seismic intensity

8 degrees

Installation method

Outdoor floor-mounted installation, concrete foundation platform

Grounding method

Common grounding grid, with a grounding resistance ≤ 4 Ω.


Keywords:

Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
Prefabricated Box-Type Substation
+
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation
  • Prefabricated Box-Type Substation

Prefabricated Box-Type Substation


A prefabricated packaged substation (commonly referred to as a “box-type substation”) is a modular, pre‑assembled, turnkey substation system that integrates high‑voltage distribution, transformers, low‑voltage distribution, metering and protection, reactive power compensation, and a monitoring system.

Brand:

Zero Line Technology

Capacity:

1600 kVA

Location:

Weifang, Shandong



Product Message

Note: Please provide your contact information, and our dedicated representatives will get in touch with you shortly!

Submit

Related products

Vertical Residential Energy Storage Cabinet (16 kWh / 21 kWh / 32 kWh)

Vertical residential energy storage cabinet, featuring safe lithium‑iron‑phosphate cells and an intelligent BMS protection system. It supports both grid‑connected and off‑grid operation, with multiple layers of safety safeguards, providing a reliable backup power source for the home.

Stackable residential energy storage cabinets (5 kWh / 10 kWh / 16 kWh)

The stackable residential energy storage cabinet offers multiple capacity modules—5 kWh, 10 kWh, and 16 kWh—and features a modular, stackable design that flexibly adapts to diverse household energy needs.

Vertical Residential All-in-One Inverter-Storage System (5.12 kWh / 10.5 kWh / 16 kWh)

The vertical residential bidirectional storage‑inverter unit features an integrated design that combines the inverter and energy‑storage battery, eliminating the need for a separate inverter and providing a one‑stop solution to meet household energy‑storage and power‑consumption needs.

Stackable Residential Inverter-Storage All-in-One Unit (5 kWh / 10 kWh / 16 kWh)

Stackable residential inverter‑storage all-in-one units integrate inverters and energy storage, offer modular stacking for scalable capacity, feature intelligent energy management, support photovoltaic grid connection, and deliver safe, reliable performance—providing households with continuous, stable backup power.

Request a quote now

Please complete this form, and we will contact you on the next business day.

Submit
%{tishi_zhanwei}%