Photovoltaic combiner box
Photovoltaic combiner box
Photovoltaic combiner box
Photovoltaic combiner box
+
  • Photovoltaic combiner box
  • Photovoltaic combiner box
  • Photovoltaic combiner box
  • Photovoltaic combiner box

Product Introduction 
A photovoltaic combiner box is a core front-end collection and integration device for distributed PV power plants. It is typically installed between the PV module array and the inverter, where it collects and consolidates the DC currents from multiple strings of modules, thereby addressing the challenges posed by decentralized power generation and tangled wiring. Featuring a standardized design, it is compatible with residential, commercial‑industrial rooftop, and ground‑mounted distributed PV systems, and can be paired with various PV inverters to enable centralized DC power transmission, circuit protection, and safety management. As such, it serves as an essential supporting component for the efficient, stable, and secure operation of PV power plants. 
Core Advantages 
Centralized collection and convergence to enhance power generation efficiency: It supports centralized combiner output for multiple PV strings, consolidates scattered PV currents, reduces line losses, and balances the power generation performance of each module string, thereby effectively improving overall system utilization and helping to enhance plant efficiency and performance. 
Multi-level DC protection, safe and reliable: Each branch circuit is equipped with independent fuse protection and features DC lightning surge protection, overcurrent protection, short-circuit protection, and reverse‑current protection. In the event of a fault on a single module, it is automatically isolated without affecting the operation of the entire array, significantly reducing the risk of system failures. 
Outdoor weather-resistant design, adaptability wide : It features a high-strength, waterproof and dustproof cabinet that is corrosion‑resistant, UV‑protected, and resistant to aging, with a high protection rating. It can reliably operate in harsh outdoor conditions—such as direct sun exposure on rooftops and exposure to wind, rain, and humidity—ensuring stable performance around the clock. 
Simplify cabling and reduce operational costs: The centralized busbar design significantly reduces the number of external cables, resulting in neat and streamlined cabling that eliminates the risk of cable clutter. At the same time, it simplifies troubleshooting, maintenance, and component replacement for faulty branches, substantially lowering subsequent operational and maintenance complexity and costs. 
Complete specifications and strong compatibility: It supports multiple standard specifications, is compatible with mainstream photovoltaic modules and inverters on the market, and works across various distributed‑generation applications—including residential, commercial & industrial, and ground‑mounted PV systems—while allowing flexible integration with PV systems of different capacities. 
Easy installation, efficient construction: The system features a lightweight structure and a well‑thought‑out layout, with standard wiring terminals pre‑installed. It is easy to mount and wire, requiring no complex commissioning, thereby significantly shortening the overall construction timeline of photovoltaic power plants.

Product Specifications

Product model

PV-M4

PV-M8

PV-M12

PV-M16

Number of input channels

Route 4

Route 8

Route 12

Route 16

Input range

DC±15A

Rated operating voltage

DC1000V

Reaction time

1s

Measurement accuracy

Photovoltaic cell measurement: Class 0.5; external analog signals: Class 0.2.

RS485 communication

RS485/ModBus-RTU protocol, 4800/9600/19200/38400 bps

Additional Features

Relay output

2 groups, switching 5A/AC 250V (5A/DC 30V)

Digital Input

Three groups of external status inputs (optocoupler or dry-contact type)

Analog Input

PT100, DC 0(4)~20 mA, DC 0~10 V, and 24 V power supply: maximum output current ≤ 25 mA.

Counterattack prevention

Can be equipped with anti-reverse.

Temperature/Humidity

Operating temperature: -25 to 60°C; relative humidity ≤95%; ambient conditions free of condensation and corrosive gases.

Altitude

≤3000m

Insulation resistance

≥100MΩ

Auxiliary power supply

Auxiliary power supply: AC 85 V to 265 V, or DC 300 V to 880 V, or DC 24 V (±10%)

Enclosure protection rating

IP65


Keywords:

Photovoltaic combiner box
Photovoltaic combiner box
Photovoltaic combiner box
Photovoltaic combiner box
+
  • Photovoltaic combiner box
  • Photovoltaic combiner box
  • Photovoltaic combiner box
  • Photovoltaic combiner box

Photovoltaic combiner box


A photovoltaic combiner box is a core front-end collection and integration device for distributed photovoltaic power plants, typically installed between the photovoltaic module array and the inverter.

Brand:

Zero Line Technology

Capacity:

4-way/8-way/12-way/16-way

Location:

Weifang, Shandong



Product Message

Note: Please provide your contact information, and our dedicated representatives will get in touch with you shortly!

Submit

Related products

Vertical Residential Energy Storage Cabinet (16 kWh / 21 kWh / 32 kWh)

Vertical residential energy storage cabinet, featuring safe lithium‑iron‑phosphate cells and an intelligent BMS protection system. It supports both grid‑connected and off‑grid operation, with multiple layers of safety safeguards, providing a reliable backup power source for the home.

Stackable residential energy storage cabinets (5 kWh / 10 kWh / 16 kWh)

The stackable residential energy storage cabinet offers multiple capacity modules—5 kWh, 10 kWh, and 16 kWh—and features a modular, stackable design that flexibly adapts to diverse household energy needs.

Vertical Residential All-in-One Inverter-Storage System (5.12 kWh / 10.5 kWh / 16 kWh)

The vertical residential bidirectional storage‑inverter unit features an integrated design that combines the inverter and energy‑storage battery, eliminating the need for a separate inverter and providing a one‑stop solution to meet household energy‑storage and power‑consumption needs.

Stackable Residential Inverter-Storage All-in-One Unit (5 kWh / 10 kWh / 16 kWh)

Stackable residential inverter‑storage all-in-one units integrate inverters and energy storage, offer modular stacking for scalable capacity, feature intelligent energy management, support photovoltaic grid connection, and deliver safe, reliable performance—providing households with continuous, stable backup power.

Request a quote now

Please complete this form, and we will contact you on the next business day.

Submit
%{tishi_zhanwei}%