Product Introduction
The grid‑connected photovoltaic cabinet is the core grid‑connection and distribution equipment for distributed PV power plants. Installed between the PV inverter and the public grid, it serves as the critical interface for safety isolation, metering, and control between the generation system and the grid. The device integrates modules such as grid‑connection switches, lightning protection, energy metering, measurement, control, and protection, and other functions. It is primarily suited for commercial and industrial rooftop PV systems, distributed PV power plants, and integrated solar‑storage projects, enabling safe grid connection of PV generation, accurate energy accounting, and grid fault isolation. This ensures stable grid‑connected operation of the PV system, complies with grid‑connection acceptance standards, and supports standardized deployment across small, medium, and large‑scale PV plants.
Core Advantages
Professional grid-connection protection, compliant grid integration: Standard features include comprehensive grid‑connection protection—anti‑islanding, over‑ and undervoltage, overcurrent and overload, phase‑loss detection, and anti‑reverse‑power flow—with fast response times. The system fully complies with State Grid’s grid‑connection technical standards, has successfully passed grid‑connection acceptance testing, and effectively eliminates grid‑connection safety risks.
Precise measurement and control, with controllable returns: Equipped with high-precision meters and sensor‑based monitoring modules, it provides real-time, accurate measurements of photovoltaic power generation and grid‑injection energy, with data that is both precise and fully traceable, seamlessly supporting corporate electricity billing, power‑plant revenue reporting, and project‑level operations and maintenance accounting.
Multi-layered security protection, stable operation: It integrates secondary lightning protection, short-circuit protection, automatic disconnection from the grid in case of faults, and electrical isolation. When grid abnormalities or equipment malfunctions occur, it swiftly disconnects the circuit, effectively safeguarding photovoltaic inverters, power‑station equipment, and grid integrity, while mitigating equipment damage and grid‑related risks.
Intelligent monitoring and operations, convenient and efficient: Supports real-time monitoring of voltage, current, power, and energy generation; optionally equipped with remote data upload and fault‑alerting capabilities, enabling continuous oversight of plant operations, reducing manual inspection costs, and enhancing O&M efficiency.
Integrated design for easy installation: The system features a standardized cabinet‑integrated design, with a well‑organized internal layout and compliant wiring. Its components are of reliable quality, and the robust structure provides effective protection against dust and moisture. It is suitable for both indoor and outdoor photovoltaic distribution applications, offering straightforward installation and commissioning, as well as a short construction timeline.
Product Specifications
Electrical rated parameters | Rated voltage | Three-phase 400 V (low-voltage grid connection) / 10 kV (high-voltage grid connection optional) |
Rated frequency | 50Hz | |
Wiring configuration | Three-phase four-wire Y0 | |
Rated current | Select based on inverter power | |
Compatible photovoltaic capacity | 50 kW to 800 kW (low-voltage side); for capacities above 1 MW, high-voltage grid connection is recommended. | |
Power factor | ≥0.99, with adjustable lead of 0.8 to lag of 0.8 | |
Grid-connection protection function | Anti-islanding protection | Dual active‑plus‑passive detection, with an actuation time of ≤2 seconds. |
Over/Undervoltage Protection | Overvoltage at 110% of Un, undervoltage at 85% of Un; operating delay is adjustable. | |
Over/Under Frequency Protection | Overfrequency: 50.5 Hz; Underfrequency: 49.5 Hz; Adjustable operating delay. | |
Reverse Power Protection | Supports reverse‑current detection, with an adjustable threshold ranging from 0% to 20% of rated power. | |
Lightning protection | Class II surge protective device (SPD), nominal discharge current 40 kA | |
Other protections | Overcurrent, short-circuit, earth leakage, three-phase imbalance, and phase-loss protection | |
Measurement and Monitoring | Electrical energy metering | Three-phase four-wire smart meter, 0.2S accuracy class, bidirectional measurement (for both grid injection and grid withdrawal) |
Communication interface | Modbus-RTU/TCP and RS485, supporting data upload to the photovoltaic monitoring platform. | |
Data Collection | Real-time acquisition of voltage, current, power, energy generation, and power factor. | |
Display mode | Digital display/touchscreen (optional) | |
Main Component Configuration | Main circuit breaker | Molded-case circuit breaker or frame-type circuit breaker, with a shunt‑trip release, supporting remote trip operation. |
Isolating switch | Visual disconnect switch, safe isolation for maintenance | |
Surge protector | Three-phase + N-line common-mode/differential-mode protection, with fault indication. | |
Instrument transformer | Current transformer, Class 0.5; voltage transformer (for high-voltage grid connection) | |
Anti-islanding device | Dedicated anti-islanding protection relay or integrated grid‑connection controller | |
Cabinet and Environment | Protection rating | IP30 (indoor) / IP54 (outdoor wall-mounted/floor-standing cabinet) |
Ambient operating temperature | -25℃~55℃ | |
Relative humidity | ≤95% (no condensation) | |
Installation method | Altitude requirements | ≤2000m (derating required at high altitudes) |
Cooling method | Natural ventilation; forced air cooling available for high-capacity models. | |
Installation type | Floor-mounted / Wall-mounted / Built-in (select as needed) | |
Inlet and outlet wiring method | Bottom-in, bottom-out / Top-in, bottom-out (customizable) | |
Grounding method | Independent grounding busbar, with a grounding resistance ≤ 4 Ω. |
Keywords:
Qualification Certification
Photovoltaic grid-connected cabinet
Brand:
Zero Line Technology
Capacity:
50 kW–800 kW
Location:
Weifang, Shandong
Category:
Related products
Vertical Residential Energy Storage Cabinet (16 kWh / 21 kWh / 32 kWh)
Stackable residential energy storage cabinets (5 kWh / 10 kWh / 16 kWh)
Vertical Residential All-in-One Inverter-Storage System (5.12 kWh / 10.5 kWh / 16 kWh)
Stackable Residential Inverter-Storage All-in-One Unit (5 kWh / 10 kWh / 16 kWh)